User Tools

Site Tools


No renderer 'odt' found for mode 'odt'
ch10_13_handbook:irig_106-13_tmats_changes

<itemtable header=Table 9-3;c=Code Name TAG,Chapter 10 Requirements;fdelim=:> _1 Code Name TAG:*R-CH10* Chapter 10 Requirements:Chapter 10 required TMATS Setup Record Attribute in all cases.

_2 Code Name TAG:*RO-CH10* Chapter 10 Requirements:If applicable data type or group is used, this attribute is required.

_3 Code Name TAG:*RO-CH10-PAK* Chapter 10 Requirements:<tablecell>This attribute is required when the Data Packing Option (R-x\PDP-n) is UNPACKED (UN) or PACKED (PFS).
When the Data Packing Option is THROUGHPUT (TM), this attribute is NOT required, but must contain
correct information if used. </tablecell>

</itemtable>

<itemtable header=Table 9-5;c=Parameter,Code Name,Definition;fdelim=:> _1 Parameter:NUMBER OF
ETHERNET
INTERFACES Code Name:R-x\EI\N
*RO-CH10* Definition:Number of recorder-reproducer Ethernet interfaces
MFS 2

_2 Parameter:ETHERNET
INTERFACE NAME Code Name:R-x\R-x\EINM-n
*RO-CH10* Definition:Name of recorder-reproducer Ethernet interface
MFS 32

_3 Parameter:ETHERNET
INTERFACE TYPE Code Name:R-x\EIT-n
*RO-CH10* Definition:<tablecell>Type of recorder-reproducer Ethernet interface
MFS 1
“0” (Reserved) “1” (Download)
“2” (Data streaming) “4” (Control and status)
“X” (Sum values for multiple type) </tablecell>

_4 Parameter:ETHERNET
INTERFACE IP
ADDRESS Code Name:R-x\EIIP-n
*RO-CH10* Definition:<tablecell>Recorder-reproducer Ethernet interface IP address:
specify the IP address in the form “xxx.xxx.xxx.xxx” where
each group of xxx can range from 0 to 255 MFS 15 </tablecell>

_5 Parameter:NUMBER OF
ETHERNET
INTERFACE PORTS Code Name:R-x\EIIP\N-n
*RO-CH10* Definition:Number of Ethernet interface ports MFS 2

_6 Parameter:PORT ADDRESS Code Name:R-x\EI\PA-n-m
*RO-CH10* Definition:<tablecell>Recorder-reproducer Ethernet interface IP port
address: specify the IP address in the form “xxxxx” where xxxxx
can range from 0 to 99999 IAW ITF. MFS 5. </tablecell>

_7 Parameter:PORT TYPE Code Name:R-x\EI\PT-n-m
*RO-CH10* Definition:<tablecell>Recorder-reproducer Ethernet interface IP port type. MFS 1.
“0” (Reserved). “1” (Download).
“2” (Data streaming). “4” (Control and status).
“X” (Sum values for multiple type). </tablecell>

_8 Parameter:NUMBER OF
CHANNEL GROUPS Code Name:R-x\CG\N
*RO-CH10* Definition:<tablecell> Number of recorder-reproducer channel group streams. MFS 2. </tablecell>

_9 Parameter:CHANNEL GROUP
NAME Code Name:R-x\CGNM-n
*RO-CH10* Definition:<tablecell> Name of the recorder-reproducer channel group. First character must be alphabetic. MFS 32. </tablecell>

_10 Parameter:CHANNEL GROUP
STREAM NUMBER Code Name:R-x\CGSN-n
*RO-CH10* Definition:<tablecell> Specify the channel group stream as an integer number. MFS 2. </tablecell>

_11 Parameter:NUMBER OF
GROUP CHANNELS Code Name:R-x\CGCH\N-n
*RO-CH10* Definition:<tablecell> Number of channels in the channel group stream. MFS 2. </tablecell>

_12 Parameter:GROUP CHANNEL
NUMBER Code Name:R-x\CGCN-n-m
*RO-CH10* Definition:<tablecell> Specify the channel ID, from R-x\TK1-n. MFS 5. </tablecell>

_13 Parameter:NUMBER OF
DRIVES Code Name:R-x\DR\N
*RO-CH10* Definition:<tablecell> Number of recorder-reproducer drives (stream destinations). Default is “1”. MFS 4. </tablecell>

_14 Parameter:DRIVE NAME Code Name:R-x\DRNM-n
*RO-CH10* Definition:<tablecell> Name of the recorder-reproducer drive. First character must be alphabetic. MFS 32. </tablecell>

_15 Parameter:DRIVE NUMBER Code Name:R-x\DRN-n
*RO-CH10* Definition:<tablecell> Specify the drive as an integer number. MFS 4. </tablecell>

_16 Parameter:DRIVE BLOCK SIZE Code Name:R-x\DRBS-n
*RO-CH10* Definition:<tablecell> Specify the drive bytes per block size. MFS 8. </tablecell>

_17 Parameter:NUMBER OF DRIVE
VOLUMES Code Name:R-x\DRVL\N-n
*RO-CH10* Definition:<tablecell> Number of volumes in the drive. Default is “1”. MFS 4. </tablecell>

_18 Parameter:VOLUME NAME Code Name:R-x\VLNM-n-m
*RO-CH10* Definition:<tablecell> Name of the drive volume. First character must be alphabetic. MFS 32. </tablecell>

_19 Parameter:VOLUME NUMBER Code Name:R-x\VLN-n-m
*RO-CH10* Definition:<tablecell> Specify the volume as an integer number. MFS 4. </tablecell>

_20 Parameter:VOLUME BLOCKS
TO ALLOCATE Code Name:R-x\VLBA-n-m
*RO-CH10* Definition:<tablecell> Specify how volume blocks will be allocated. MFS 1.
“0” (All). “1” (Available).
“2” (Number of blocks). </tablecell>

_21 Parameter:VOLUME NUMBER
OF BLOCKS Code Name:R-x\VLNB-n-m
*RO-CH10* Definition:<tablecell> Specify the volume as an integer number of blocks. MFS 32. </tablecell>

_22 Parameter:NUMBER OF LINKS Code Name:R-x\L\N
*RO-CH10* Definition:<tablecell> Number of recorder-reproducer channel group streams/drive-volume links. MFS 2. </tablecell>

_23 Parameter:LINK NAME Code Name:R-x\LNM-n
*RO-CH10* Definition:<tablecell> Name of the recorder-reproducer channel group stream/drive-volume link. First character must be alphabetic. MFS 32. </tablecell>

_24 Parameter:LINK SOURCE
STREAM NAME Code Name:R-x\LSNM-n
*RO-CH10* Definition:<tablecell> Specify the recorder-reproducer channel group stream name. MFS 32. </tablecell>

_25 Parameter:LINK SOURCE
STREAM NUMBER Code Name:R-x\LSSN-n
*RO-CH10* Definition:<tablecell> Specify the recorder-reproducer channel group stream/drive-volume number,
from R-x\CGSN-n. MFS 2. </tablecell>

_26 Parameter:LINK
DESTINATION
DRIVE NUMBER Code Name:R-x\LDDN-n
*RO-CH10* Definition:<tablecell> Specify the recorder-reproducer channel group stream destination drive number,
from R-x\DRN-n. MFS 4. </tablecell>

_27 Parameter:LINK
DESTINATION
VOLUME NUMBER Code Name:R-x\LDVN-n
*RO-CH10* Definition:<tablecell> Specify the recorder-reproducer channel group stream destination volume number,
from R-x\VLN-n-m. MFS 4. </tablecell>

</itemtable>

ch10_13_handbook/irig_106-13_tmats_changes.txt · Last modified: 2014/08/14 09:51 by pferrill

Except where otherwise noted, content on this wiki is licensed under the following license: CC0 1.0 Universal
CC0 1.0 Universal Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki