This is an old revision of the document!
<itemtable header=Table 9-3;c=Code Name TAG,Chapter 10 Requirements;fdelim=:> _1 Code Name TAG:*R-CH10* Chapter 10 Requirements:Chapter 10 required TMATS Setup Record Attribute in all cases.
_2 Code Name TAG:*RO-CH10* Chapter 10 Requirements:If applicable data type or group is used, this attribute is required.
_3
Code Name TAG:*RO-CH10-PAK*
Chapter 10 Requirements:<tablecell>This attribute is required when the Data Packing Option (R-x\PDP-n) is UNPACKED (UN) or PACKED (PFS).
When the Data Packing Option is THROUGHPUT (TM), this attribute is NOT required, but must contain
correct information if used.
</tablecell>
</itemtable>
<itemtable header=Table 9-5;c=Parameter,Code Name,Definition;fdelim=:>
_1
Parameter:NUMBER OF
ETHERNET
INTERFACES
Code Name:R-x\EI\N
*RO-CH10*
Definition:Number of recorder-reproducer Ethernet interfaces
MFS 2
_2
Parameter:ETHERNET
INTERFACE NAME
Code Name:R-x\R-x\EINM-n
*RO-CH10*
Definition:Name of recorder-reproducer Ethernet interface
MFS 32
_3
Parameter:ETHERNET
INTERFACE TYPE
Code Name:R-x\EIT-n
*RO-CH10*
Definition:<tablecell>Type of recorder-reproducer Ethernet interface
MFS 1
“0” (Reserved) “1” (Download)
“2” (Data streaming) “4” (Control and status)
“X” (Sum values for multiple type)
</tablecell>
_4
Parameter:ETHERNET
INTERFACE IP
ADDRESS
Code Name:R-x\EIIP-n
*RO-CH10*
Definition:<tablecell>Recorder-reproducer Ethernet interface IP address:
specify the IP address in the form “xxx.xxx.xxx.xxx” where
each group of xxx can range from 0 to 255 MFS 15
</tablecell>
_5
Parameter:NUMBER OF
ETHERNET
INTERFACE PORTS
Code Name:R-x\EIIP\N-n
*RO-CH10*
Definition:Number of Ethernet interface ports MFS 2
_6
Parameter:PORT ADDRESS
Code Name:R-x\EI\PA-n-m
*RO-CH10*
Definition:<tablecell>Recorder-reproducer Ethernet interface IP port
address: specify the IP address in the form “xxxxx” where xxxxx
can range from 0 to 99999 IAW ITF. MFS 5.
</tablecell>
_7
Parameter:PORT TYPE
Code Name:R-x\EI\PT-n-m
*RO-CH10*
Definition:<tablecell>Recorder-reproducer Ethernet interface IP port type. MFS 1.
“0” (Reserved). “1” (Download).
“2” (Data streaming). “4” (Control and status).
“X” (Sum values for multiple type).
</tablecell>
</itemtable>