User Tools

Site Tools


ch10_13_handbook:start

This is an old revision of the document!


~~ODT~~

IRIG 106-13 Chapter 10 Programming Handbook

This programming handbook presents the results of work performed by members of the Telemetry Group (TG) under Task TG-110 of the Range Commanders Council (RCC) to update the original handbook to reflect additions and changes to the standard made since its release.

IRIG 106-09 was released in April of 2009 with primarily clarifications and additional definitions for existing commands. No new data types were added with this release although the TELNET protocol was introduced as a new interface type for ground-based recorders. In addition, a number of changes were made to support XML TMATS for use in configuring the recorder.

IRIG 106-13 was released in June of 2013 with two new data types (CAN BUS and AFDX) plus a new sub-type to support Dynamic Image Packets. A complete list of changes to this version can be found under IRIG 106-13 Changes. A number of updates were also made to TMATS (IRIG 106-13 Chapter 9) related to Chapter 10 with a complete list found under IRIG 106-13 TMATS Changes.

DOCUMENT PURPOSE

The primary goal of this document is to provide updates to the original where additional clarification is needed or where new information needs to be added. The sections below address both of these cases.

RECORDER COMMAND AND CONTROL

  • Network Control

IRIG 106-09 added the ability to issue Chapter 6 commands via a TELNET interface. It does not specify how this interface is to be configured nor does it provide any specific commands for that purpose.

ch10_13_handbook/start.1407770230.txt.gz · Last modified: 2014/08/11 10:17 by pferrill

Except where otherwise noted, content on this wiki is licensed under the following license: CC0 1.0 Universal
CC0 1.0 Universal Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki