User Tools

Site Tools


ch10_handbook:conformance_to_irig_106

~~ODT~~

CONFORMANCE TO IRIG 106

Chapter 10 of the IRIG 106 standard sets forth requirements for digital recorders. Paragraph 10.3.1 summarizes requirements for a recorder to be considered 100 percent compliant with the standard. A number of features described in Chapter 10 are considered optional. Optional features are not required to be implemented; however, if they are implemented, they must be in accordance with the Chapter 10 standard.

Rather than reiterate all the requirements of Chapter 10, the tables below present a brief outline of the major requirement areas, as well as those portions of Chapter 10 that have been identified as optional.

PHYSICAL INTERFACE REQUIREMENTS
Ch 10 Section Required Optional Physical Interfaces
10.3, 10.4.1 See Note Recorder Fibre Channel
10.4.2 - Fibre Channel SCSI
10.4.1 - Data Download
10.3.11 - Data streaming
10.3.8, 10.7 - Configuration with TMATS
10.7.1 - Recorder Control and Status
10.4.2 See Note Recorder IEEE 1394B
10.4.2.2 - SCSI/SBP-2
10.4, 10.9 - Data Download
10.3.11 - Data streaming
10.3.8, 10.7 - Configuration with TMATS
10.7.1 - Recorder control and status
10.4, 10.4.3 See Note Recorder Ethernet (on board)
10.4 - Data Download
10.3.11 - Data streaming
10.3.8, 10.7 - Configuration with TMATS
10.7.1 - Recorder Control And Status
10.3.5, 10.3.6 Removable Memory Media (RMM)
10.9.5 - IEEE 1394B Bilingual Socket
10.9 - IEEE 1394B SCSI/SBP-2
10.4, 10.9 - Data Download
10.3.8, 10.7 - Configuration with TMATS
10.3.2, 10.7.10 Discrete Lines
10.7.10 - Recorder control and status
10.3.2 RS-232 and 422 Full Duplex Communication
10.7 - Configuration with TMATS
10.7 - Recorder Control And Status
10.3 External Power Port
Note: Either Fibre Channel or IEEE 1394B is required for on-board recorders; other network interfaces are optional. Ethernet is required for ground-based recorders; other network interfaces are optional.
LOGICAL INTERFACE REQUIREMENTS
Ch 10 Section Required Optional Logical Interfaces
10.5 Media File Interface
10.5 - Directory & File Table Entries
10.3.7 - STANAG fields - File Size, File Create Date, File Close Time
10.6 Packetization & Data Format
10.6.1 - Secondary header
10.6.1 - Filler for packet length
10.6.1 - Data checksum
10.6.1 - Intrapacket headers and time stamps
ch10_handbook/conformance_to_irig_106.txt · Last modified: 2014/05/29 14:43 by bob

Except where otherwise noted, content on this wiki is licensed under the following license: CC0 1.0 Universal
CC0 1.0 Universal Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki